요 약
In present study, the effect of shapes of an air cooling module on the heattransferperformance for electronic packaging applications was numerically investigated. The types of three different fins considered in this study were pin-fin, plate-fin and ㄷ fin which have the different surface areas.
To improve cooling performance of the heat sinks for the LCD TV by adequate natural conve
1. Introduction
1) Design environment
경기도 용인시 수지구 죽전동의 일일 생활폐기물을 10t으로 가정하였다. 또한 제3공학관에 온수 및 전력공급을 위한 전력량 조사를 단국대학교 전기시설실에 자문을 구하여 수행하였다. 그 결과 아래 사진과 같이 제3공학관의 일일 전력소비량은 약 5.8KWh임을 알 수 있
Related Physical Principle
-Evaporation
Engineering Operation Principle
-Structure
-Circulation Steps
-Heat Exchange
Influencing Factor On Wind Power
Angle: Optimum Angle Exist
Number: 3~4 is general
Material: Strong but Light
Width: Wide
Our Product < Best air conditioner >
Heattransfer efficiency↑
→Connects electric fan wi
1. 설계목표
① 열펌프를 이용하여 공기를 원하는 온도 값에 도달시킨다.
② 열펌프를 이용하여 원하는 값에 도달하지 않을 경우 전열기를 이용하여 원하는 값에 도달시킨다.
③ 배출 공기로부터 열을 재활용하는 시스템을 구성한다.
④ 친환경적이면서 산업 표준에 맞는 냉매를 설정한다.
2.
the short
length of the fins laterally, rather than longitudinally down
the long length.
Focused on placing the jets at the end of the fins and using them to induce air flow longitudinally down the length of the fin
The primary jet to emanate directly through the heat sink base and entrain and expel air laterally over the height of the fins through a matrix of synthetic jets